top of page
ABCD Matrix

Volume Holographic Grating

A Volume Holographic Grating (VHG) — also called a Volume Bragg Grating (VBG) or bulk Bragg grating — is a diffraction grating created by a periodic modulation of the refractive index throughout the volume of a bulk transparent material (typically a photosensitive glass), rather than on a surface.


Unlike surface-relief diffraction gratings or fiber Bragg gratings, the interaction with light occurs over a substantial thickness (often millimeters). This makes the grating highly selective in both wavelength and angle according to the Bragg condition.


Technical Information:


VHGs are usually fabricated holographically: a photosensitive (photorefractive) glass is exposed to an ultraviolet interference pattern formed by two coherent UV beams. The resulting intensity pattern permanently modifies the refractive index. After exposure, thermal development is often used. Direct femtosecond laser writing is an alternative method.


Light is efficiently diffracted or reflected only when the Bragg condition is satisfied:


λ=2nΛcos⁡θ


where λ is the wavelength in vacuum, n is the average refractive index of the material, Λ is the grating period, and θ is the angle of incidence inside the medium. Light that does not meet this condition is transmitted with very low loss.


Key properties include:


  • High spectral selectivity: Reflection/diffraction bandwidths can be as narrow as 0.01–0.1 nm (or broader if the grating is chirped).


  • High angular selectivity: Only a narrow range of incidence angles produces efficient diffraction.


  • Controllable efficiency: Peak reflectance or diffraction efficiency can be engineered from a few percent to >99 %, depending on grating length and index modulation depth.


  • Reflecting vs. transmitting geometries: In reflecting VHGs the fringes are roughly perpendicular to the beam (retro-reflection or near-retro-reflection). In transmitting VHGs the fringes are roughly parallel to the beam and the diffracted light exits the same face as the transmitted beam.


  • Power handling: Because the grating is distributed in bulk glass with low absorption and can accept multi-millimeter beam diameters, damage thresholds are high and average/peak power handling is excellent.


  • Chirped variants: The grating period can vary along the device (chirped volume Bragg gratings), producing large chromatic dispersion useful for pulse stretching and compression.


Multiple independent gratings can also be multiplexed into the same volume of glass.⁠


Applications:


  • Wavelength stabilization of lasers:
    The most common commercial use is locking the wavelength and narrowing the linewidth of laser diodes. A VHG placed after a collimating lens provides selective optical feedback only at the design wavelength. This forces the diode to operate in a narrow spectral band (often <<1 nm) that is largely independent of temperature and aging. Such VHG-stabilized diodes are widely used for Raman spectroscopy, solid-state laser pumping, and applications requiring high spectral brightness.


  • Spectral beam combining:
    Several laser beams of slightly different wavelengths can be combined into a single diffraction-limited beam. One wavelength is reflected while others are transmitted (or multiple wavelengths are diffracted at different angles). This technique is used for power scaling of diode and fiber lasers.


  • Narrowband optical filters:
    VHGs function as high-quality notch filters or bandpass filters. They reflect (or diffract) only a narrow spectral slice while transmitting the rest of the spectrum with minimal loss. Applications include laser cleanup, Raman filtering, and astronomy.


  • Pulse stretching and compression:
    Chirped volume Bragg gratings provide large group-delay dispersion in a compact bulk optic. They are used in chirped-pulse amplification (CPA) systems for ultrashort-pulse lasers, offering higher peak-power handling than fiber Bragg gratings.


Other uses:


  • Pump injection into laser resonators (reflect laser wavelength, transmit nearby pump wavelength).


  • Wavelength-division multiplexing (WDM) components in optical communications.


  • Volume-phase holographic (VPH) transmission gratings for spectroscopy, OCT, and astronomical instruments, where high diffraction efficiency and low scatter are advantageous.


  • Holographic optical elements and specialized beam-manipulating devices.


Volume holographic gratings provide a robust, high-selectivity, and high-power-capable alternative to surface gratings and thin-film filters. Their Bragg selectivity and bulk construction make them especially valuable for laser wavelength control, beam combining, and advanced pulse manipulation in photonics systems.

bottom of page