
Volume Bragg Grating (VBG)
Volume Bragg Grating (VBG) (also called volume holographic grating, VHG, or bulk Bragg grating) is a Bragg grating formed by a periodic modulation of the refractive index throughout the volume of a transparent bulk material, rather than only on a surface or within an optical fiber core.
Unlike surface diffraction gratings or fiber Bragg gratings (FBGs), a VBG occupies the bulk of a piece of material (typically a polished glass block or parallelepiped a few millimeters thick). This volume structure produces highly wavelength- and angle-selective diffraction when the Bragg condition is met.
Technical Information:
Principle and Bragg Condition:
A VBG acts as a narrowband spectral and/or angular filter. Resonant diffraction occurs only for wavelengths and incidence angles satisfying the Bragg condition. Approximate forms are:
Reflecting geometry: λ≈2nΛcosθ
Transmitting geometry: λ≈2nΛsinθ
where λ is the wavelength, nnn the average refractive index, Λ the grating period, and θ the relevant angle inside the medium (including any tilt of the grating planes).
Main Types:
Reflecting VBGs (RBGs): Grating planes oriented roughly perpendicular to the beam. They behave like narrowband mirrors (retro-reflection or near-retro-reflection). Spectral selectivity is typically 0.02–2 nm; diffraction efficiencies can exceed 99%.
Transmitting VBGs (TBGs): Grating planes oriented roughly parallel to the beam. The diffracted beam exits the same face as the transmitted beam would but is deflected by a fixed angle. They generally have broader spectral selectivity (0.3–20 nm) and tighter angular selectivity.
Chirped VBGs (CVBGs): Period varies continuously along the length, providing controlled chromatic dispersion for pulse stretching/compression.
Multiplexed VBGs can contain several independent gratings written in the same volume.
Fabrication:
VBGs are most commonly recorded holographically in photosensitive materials, especially photo-thermo-refractive (PTR) glass (a silicate glass doped with silver, cerium, and fluorine). Two coherent UV beams (typically ~325 nm) interfere inside the glass to create a latent image. Subsequent thermal development precipitates nanocrystals (e.g., NaF), permanently modulating the refractive index (Δn typically hundreds of ppm, up to ~10^{-3}). Direct laser writing with focused ultrashort pulses is an alternative method. The finished pieces are usually polished and anti-reflection coated.
Typical Properties:
Spectral bandwidth (FWHM): tens of picometers to a few nanometers, set mainly by thickness and index modulation depth.
Diffraction efficiency / reflectivity: a few percent up to >99%.
Very low absorption and scattering losses.
High laser-damage threshold (suitable for continuous-wave powers of hundreds of watts to kilowatts and high-peak-power pulsed operation).
Low temperature dependence of the Bragg wavelength (~0.01 nm/°C).
Thickness typically 0.5–several mm (or longer for chirped devices); clear apertures of several millimeters are common.
Applications:
Wavelength Stabilization of Laser Diodes:
The most widespread use is locking the emission wavelength of laser diodes (edge emitters, bars, stacks, VCSELs, etc.). A reflecting VBG is placed after a collimating optic and provides narrowband optical feedback. This forces the diode to lase only near the Bragg wavelength, reducing the free-running linewidth (often several nm) to <0.1 nm (or much narrower) and greatly suppressing temperature and current drift. Stabilized 808 nm and 976 nm diodes are widely used for pumping Nd- and Yb-doped solid-state and fiber lasers.
Spectral Beam Combining (SBC):
Multiple lasers operating at slightly offset wavelengths can be spatially combined with high efficiency (>90%) using one or more VBGs. Reflecting or transmitting VBGs (including multiplexed or stacked designs) act as wavelength-selective combiners. Demonstrations have combined multi-hundred-watt fiber or diode lasers into single beams with good beam quality; the approach scales toward multi-kW systems.
Other Key Uses:
Narrowband optical filters and notch filters (high rejection outside a narrow passband).
Angular filtering to improve beam quality or enforce single-mode operation.
Chirped-pulse amplification (CPA): CVBGs for stretching and compressing ultrashort pulses at high peak powers (larger apertures than fiber gratings).
Coherent/phase locking and coherent beam combining.
Wavelength-division multiplexing components in free-space or hybrid telecom systems.
Pump injection into laser resonators, Raman spectroscopy sources, LiDAR, quantum optics, gas sensing, and frequency conversion.
VBGs are valued in high-power laser systems because of their combination of spectral precision, power handling, thermal stability, and monolithic glass construction (no moving parts or thin-film degradation).