top of page
ABCD Matrix

Semiconductor Laser

A Semiconductor Laser (also called a laser diode or diode laser) is a laser that uses a semiconductor material as its gain medium. Optical amplification is produced by stimulated emission at interband transitions under conditions of high carrier density in the conduction band, most commonly achieved by injecting electrical current through a p-n or p-i-n junction.


Technical Information:


Semiconductor lasers are a subset of solid-state lasers. In the usual interband case:


  • Forward bias injects electrons into the conduction band and holes into the valence band of a direct-bandgap semiconductor.


  • Above a threshold current density, population inversion occurs and stimulated emission dominates over absorption and spontaneous emission.


  • Optical feedback is provided by a resonator—typically cleaved facets (Fabry–Pérot), a distributed Bragg grating (DFB), or distributed Bragg reflectors (VCSEL).


Key material systems (III–V compounds) determine the emission wavelength via the bandgap energy:


  • GaN-based: violet/blue (~380–470 nm)

  • AlGaInP / GaAs: red (~630–680 nm)

  • AlGaAs / GaAs: near-IR (~720–850 nm)

  • InGaAs / GaAs: ~900–1100 nm

  • InGaAsP / InP: 1.2–1.6 µm (telecom window)

  • Longer-wavelength materials (GaSb, quantum cascade) for mid-IR


Principal types:


  • Edge-emitting lasers — light propagates parallel to the wafer and exits a cleaved facet (Fabry–Pérot, DFB, EML).


  • Surface-emitting lasers — light exits perpendicular to the wafer (VCSELs are the most common monolithic type).


  • Special variants include quantum cascade lasers (intraband transitions), optically pumped semiconductor lasers (VECSELs / OPSLs), and external-cavity designs for narrow linewidth or tunability.


Characteristic advantages:


  • Extremely compact (active region often <1 mm³).

  • High wall-plug efficiency (commonly 30–60 % or higher).

  • Direct electrical pumping and high-speed current modulation.

  • Wafer-scale manufacturing → low cost at volume.

  • Wavelengths spanning ultraviolet to mid-infrared.


Applications:


Semiconductor lasers are the most widely used lasers because of the combination of size, efficiency, and cost:


  • Optical communications — DFB and EML lasers for single-mode fiber telecom and datacom links; VCSELs for short-reach multimode data-center interconnects.


  • Optical data storage and consumer electronics — CD, DVD, and Blu-ray pickups; laser printers; barcode scanners; laser pointers.


  • Pumping of other lasers — high-power diode bars and stacks pump solid-state lasers (Nd:YAG, etc.) and fiber lasers/amplifiers (EDFA, etc.).


  • Industrial and materials processing — multi-kilowatt diode laser systems for cutting, welding, and additive manufacturing.


  • Sensing, spectroscopy, medical, and LIDAR — narrow-linewidth or tunable devices for gas sensing, biomedical imaging, and ranging.


  • Silicon photonics and co-packaged optics — external or heterogeneously integrated lasers as light sources for photonic integrated circuits.


Semiconductor lasers form the backbone of modern photonics infrastructure, from the internet to consumer devices and high-power industrial tools.

bottom of page