top of page
ABCD Matrix

Semiconductor Inspection

Semiconductor Inspection (in the context of lasers and photonics) refers to the non-contact, optical examination of semiconductor wafers, films, dies, and packages to detect defects, contaminants, and process anomalies, and to perform metrology (dimensional and material characterization). It relies heavily on lasers and photonic techniques for high sensitivity, speed, and non-destructive operation, which are essential for maintaining high yields in semiconductor manufacturing.


Technical Information:


Lasers are particularly well-suited because they provide coherent, monochromatic, high-brightness illumination that can be tightly focused and scanned rapidly. Common approaches include:


  • Laser scattering / darkfield inspection: A laser beam illuminates the wafer surface (often in a spiral or raster scan). Specular reflection is blocked, and only light scattered by defects (particles, pits, scratches, or roughness) is collected by detectors. Scattered intensity correlates with defect size. This is the workhorse for unpatterned (bare or blanket-film) wafer inspection.


  • Wavelength dependence: Shorter wavelengths improve sensitivity to smaller defects because the scattering efficiency of sub-wavelength particles rises strongly as wavelength decreases (related to Rayleigh scattering). Visible or green lasers (e.g., 532 nm) were once adequate; modern systems use ultraviolet (UV) and deep-UV (DUV) lasers, commonly 266 nm (frequency-doubled optically pumped semiconductor lasers) or 355 nm. Continuous-wave (CW), single-frequency, low-noise sources are preferred for stable interferometric or high-throughput applications.


  • Other photonic techniques:

    • Brightfield imaging and differential interference contrast for larger pattern defects or height variations.

    • Scatterometry (analyzing reflected/diffracted light patterns) for critical-dimension (CD) metrology.

    • Ellipsometry and interferometry for film thickness, refractive index, and stress.

    • Photoluminescence (PL) imaging, especially useful for compound semiconductors.

    • Short-wave infrared (SWIR, ~900–1700 nm) imaging with InGaAs cameras: Silicon is largely transparent in this band, enabling through-wafer or backside inspection of internal cracks, voids, bonding defects, and circuitry.

    • Laser-driven light sources (e.g., laser-sustained plasma) for broadband, high-brightness illumination in certain inspection tools.


Advanced systems (such as the KLA Surfscan family) combine DUV lasers with optimized optics, multiple illumination modes (normal and oblique incidence), and algorithms to achieve defect sensitivities in the tens of nanometers (and lower in leading-edge configurations) on 200 mm and 300 mm wafers, while maintaining high throughput suitable for high-volume manufacturing.


Applications:


Semiconductor inspection using lasers and photonics is applied throughout the manufacturing flow:


  • Unpatterned/bare wafer inspection: Detecting particles, scratches, pits, haze, and crystal defects on incoming silicon or epitaxial wafers, and monitoring tool cleanliness and process contamination. Critical for advanced nodes and EUV-related processes.


  • Patterned wafer inspection: Finding pattern defects, residues, or process-induced anomalies after lithography, etch, deposition, or other steps.


  • Compound semiconductors: Inspection of SiC, GaN, InP, and similar materials used in power electronics, RF devices, and photonics (including photoluminescence channels for crystal quality).


  • Metrology: Measuring film thickness/composition, surface topography/roughness, wafer flatness/warp, critical dimensions, and overlay.


  • Failure analysis and packaging: SWIR through-silicon imaging of cracks, voids, TSVs, or alignment; laser stimulation techniques (e.g., OBIRCH, laser voltage probing) for localizing electrical defects; inspection of bumps, bonds, and advanced packaging structures.


  • Photonic devices: Quality control of laser diodes, photonic integrated circuits (PICs), and related wafers/dies.


These laser- and photonics-based methods dominate optical inspection (which accounts for the large majority of wafer inspection capacity) because they combine the sensitivity needed for shrinking feature sizes with the speed required for production monitoring, directly supporting yield optimization and cost reduction.


Semiconductor inspection in the lasers/photonics domain is the suite of optical techniques that use controlled laser light and detection of reflected, scattered, or emitted photons to find and quantify nanometer-scale issues that would otherwise destroy device yield.

bottom of page