top of page
ABCD Matrix

Quartz Optical Window

A quartz optical window is a flat, polished plate of silicon dioxide (SiO₂) that lets a laser or broadband optical beam pass while sealing the beam path from air, process gas, vacuum, coolant, or debris. In lasers and photonics the term usually means fused quartz or fused silica, not a crystalline-quartz waveplate.


Material:


Two related materials are sold under the quartz name:


  • Fused silica / fused quartz is amorphous SiO₂. Synthetic UV-grade fused silica (Corning HPFS 7980, JGS1, and similar) is the standard laser-window substrate. IR-grade material (Infrasil, Corning 7979, JGS3) has lower hydroxyl (OH) content.


  • Crystal quartz (α-quartz) is a birefringent single crystal. It is used for windows only in special cases; more often it is cut as waveplates, retarders, or polarizing optics.


Fused silica is preferred for windows because it is isotropic, highly homogeneous, and free of the orientation and temperature-dependent birefringence of the crystal.


Optical and thermal properties:


Typical figures for UV-grade fused silica at room temperature:


  • Useful transmission is about 185 nm to 2.1 μm for UV grade; IR grades extend to about 3–3.5 μm.


  • The refractive index is n≈1.46 in the visible and n≈1.450 at 1064 nm.


  • The Abbe number is about 67.8.


  • Uncoated transmittance is about 92–93%, from Fresnel loss of roughly 3.5% per surface.


  • The coefficient of thermal expansion is about 0.55×10−6 K−1.


  • dn/dT is about 10×10−6 K−1.


  • Density is about 2.2 g/cm³.


The low coefficient of thermal expansion and modest dn/dT keep thermal lensing small under high average power, which is why fused silica is preferred over N-BK7 for laser windows. OH absorption bands near 1.38 μm and 2.7 μm limit ordinary UV-grade material in the near-IR; low-OH IR grades are used when those bands matter (for example around 1.5 μm telecom or mid-IR edges).


Laser-induced damage threshold depends on polish, coating, wavelength, and pulse length. Polished fused silica routinely handles multi-J/cm² nanosecond pulses at 1064 nm and 532 nm; thresholds fall at 355 nm and 266 nm and for femtosecond pulses. Surface damage usually limits the part before bulk damage.


Form and coatings:


Windows are plane-parallel or slightly wedged (a few arcminutes to a degree) so that etalon fringes and back-reflections do not re-enter the laser. Typical thickness is 1–10 mm; diameter is set by clear aperture and pressure differential. Surfaces are polished to λ/4–λ/10 flatness and low scatter. Antireflection coatings (single-line V-coats at 1064, 532, or 355 nm, or broadband UV–VIS) raise transmission above 99% per surface. Uncoated parts are used when the spectrum is very broad or the coating would lower the damage threshold.


Applications:


  • Protective windows on cutting, welding, and marking heads, isolating focusing optics from spatter and fumes.


  • Vacuum and gas-cell viewports for spectroscopy, laser–plasma experiments, and beamlines.


  • Harmonic separators and output windows on Nd:YAG, fiber, and excimer systems (193 nm ArF, 248 nm KrF, 266/355/532/1064 nm).


  • Enclosures and isolator windows in high-average-power beam delivery, where low thermal lensing matters.


  • Semiconductor and inspection tools that need deep-UV transmission and radiation hardness.


Crystal quartz windows appear when controlled birefringence or optical activity is wanted, or in some high-temperature and piezoelectric setups. For ordinary beam transmission, fused silica is the default quartz window.

bottom of page