top of page
ABCD Matrix

Graded Index Lens (GRIN Lens)

Graded-Index Lens (GRIN lens) is an optical element that focuses or collimates light by means of a continuous radial variation of the refractive index rather than by curved surfaces. It is typically a cylindrical rod with flat end faces, where the refractive index is highest on the optical axis and decreases toward the periphery (approximately parabolically).


Technical Information:


In a conventional lens, optical power comes from the varying path length through material of constant refractive index (curved surfaces). In a GRIN lens, the path length is essentially constant while the refractive index n(r) varies with radial distance rrr from the axis. This produces a radially dependent optical path length that bends rays continuously inside the lens.


A common approximate index profile is:


n(r) ≈ n0/1−Ar2


(or a hyperbolic-secant form), where n0​ is the on-axis index and A (or the gradient constant ggg) determines the strength of the gradient.


Rays inside a focusing GRIN lens follow approximately sinusoidal paths. The pitch of the lens is the number of oscillation periods that fit within its length:


  • Quarter-pitch (0.25 pitch): Collimates a point source on the input face (or focuses a collimated beam onto the output face). Widely used for fiber collimators.


  • Slightly less or more than 0.25 pitch (e.g., 0.23 or 0.29): Provides a finite working distance outside the lens.


  • Half-pitch (0.5): Images an object on the input face inverted onto the output face.


  • Full-pitch (1.0): Relays an image without inversion.


Because focusing occurs throughout the volume rather than only at surfaces, GRIN lenses can be very small (diameters from ~0.25 mm upward), have flat faces that are easy to align and bond, and exhibit low spherical aberration for on-axis rays when the profile is well controlled. They are typically designed for a specific wavelength because the gradient constant is wavelength-dependent. Fabrication methods include ion-exchange processes in glass rods.


Applications:


Fiber optics and laser coupling:


  • Fiber collimators: A GRIN lens fused or bonded to a fiber end converts the diverging fiber output into a collimated beam (or vice versa).


  • Fiber-to-fiber coupling and mode-field adapters.


  • Coupling the highly divergent output of laser diodes into single-mode or multimode fibers.


  • Compact beam delivery and focusing in fiber-pigtailed modules.


Imaging and micro-optics:


  • Miniature imaging systems, including endoscopic probes and implantable GRIN lenses for deep-tissue microscopy (widefield, confocal, or multiphoton imaging in neuroscience).


  • Optical data storage and scanning systems.


  • Arrays of GRIN lenses for document scanners or multi-channel imaging.


Other photonics uses:


  • Beam shaping and focusing in compact laser systems.


  • Ophthalmic applications (e.g., certain contact lenses).


  • Monolithic solid-state laser designs where a GRIN element provides focusing.


GRIN lenses are valued in photonics for their small size, flat surfaces (facilitating alignment-free assembly), compatibility with fiber pigtails, and ability to provide high numerical aperture in a short length. They are standard components in fiber-optic collimators, laser diode modules, and miniature imaging systems.

bottom of page