top of page
ABCD Matrix

Fiber Collimator

A fiber collimator (or fiber-optic collimator) is a compact optical assembly that converts the diverging light exiting an optical fiber into a free-space collimated beam, or conversely launches a collimated free-space beam into a fiber.


It is a standard interface between fiber optics and free-space optics in lasers and photonics systems.


How It Works:


Light emerging from a fiber end diverges. In a fiber collimator, the fiber end is fixed (or adjustable) at a distance approximately equal to the focal length fff of a lens. The lens converts the diverging spherical wavefronts into a nearly planar (collimated) beam with low divergence.


The same device works in reverse to couple a collimated beam into a fiber. Pairs of collimators are commonly used for fiber-to-fiber coupling over free space (with optional elements such as filters or polarizers inserted between them).


Main variants:


  • Permanently attached (pigtailed) to bare fiber — compact and low-cost.


  • Connectorized (e.g., FC, FC/APC, SMA) — easy to attach/remove from patch cables.


Technical Information:


For single-mode (or polarization-maintaining) fibers with an approximately Gaussian mode, the collimated beam radius is given by:


wcollimated ≈ f⋅θfiber ≈    f⋅λ   

                                               πwfiber


where wfiber​ is the mode-field radius, λ is the wavelength, and θfiber​ is the fiber’s far-field divergence half-angle.


  • Larger focal length → larger collimated beam diameter and lower divergence (longer Rayleigh range).


  • Smaller fiber mode size → larger collimated beam for a given focal length.


  • Multimode fibers produce larger, launch-condition-dependent beams.


Typical components and performance:


  • Lenses: GRIN (gradient-index) for compact telecom-style units; aspheric, doublet, triplet, or air-spaced lenses for better wavefront quality or larger beams; sometimes reflective (off-axis parabolic) for broadband use.


  • Insertion loss of a single collimator is often ~0.2 dB or lower with good AR coatings.


  • Beam diameters range from sub-millimeter to tens of millimeters.


  • High-power versions use epoxy-free designs, fused silica optics, and often end-caps or mode strippers to handle kilowatt-class powers without damage.


  • Angled fiber ends (e.g., APC) reduce back-reflections but introduce a small beam offset that must be managed.


Wavelength ranges cover UV through mid-IR, with AR coatings matched to the band. Adjustable-focus models allow fine collimation tuning; fixed versions are pre-aligned for diffraction-limited performance at a design wavelength.


Applications:


Fiber collimators appear throughout lasers and photonics wherever light must move between guided and free-space domains:


  • Fiber lasers and amplifiers — collimating high-power outputs or combining beams.

  • Free-space optical communications and interconnects — launching or receiving collimated beams over distance.

  • Interferometry and precision metrology — high-wavefront-quality collimated beams.

  • Spectroscopy and sensing — illuminating samples or collecting light into fibers (Raman, fluorescence, gas sensing, etc.).

  • Biomedical/medical — OCT, laser therapy, microscopy, cytometry.

  • Industrial laser processing — beam delivery for cutting, marking, or micromachining (often with large high-power collimators).

  • Fiber-optic components — building blocks for isolators, circulators, Faraday mirrors, filters, and switches when combined with other elements.

  • Laboratory and test setups — easy coupling of fiber-coupled sources into free-space optical systems.


Fiber collimators are the practical, alignment-stable way to turn the highly divergent output of a fiber into a usable free-space laser beam (or vice versa) across a wide range of power levels, wavelengths, and beam sizes.


bottom of page