top of page
ABCD Matrix

Fiber Bragg Grating (FBG)

Fiber Bragg Grating (FBG) is a periodic (or aperiodic) perturbation of the refractive index written into the core of an optical fiber. It acts as a wavelength-selective reflector (or filter) that reflects a narrow band of wavelengths satisfying the Bragg condition while transmitting other wavelengths.


Technical Information:


The Bragg condition is:


λB = 2neffΛ


where λB is the reflected (Bragg) wavelength, neff is the effective refractive index of the guided mode, and Λ is the grating period (typically hundreds of nanometers for telecom wavelengths).


Even a weak index modulation (e.g., Δn≈10−4) can produce high reflectivity when the grating is sufficiently long (typically a few millimeters to centimeters), because the reflections from each period add constructively only at the Bragg wavelength. Reflection bandwidth is usually well below 1 nm for uniform gratings; narrower bandwidths are achieved with longer, weaker gratings. Side lobes in the reflection spectrum can be suppressed by apodization (tapering the modulation strength).


Variants:


  • Uniform FBGs: Constant period; narrowband reflectors/filters.


  • Chirped FBGs: Period varies along the length; broader reflection bandwidth and controllable dispersion (group-delay variation).


  • Tilted (blazed) FBGs: Index planes tilted relative to the fiber axis; couple light to cladding modes.


  • Long-period fiber gratings: Much longer periods; couple core modes to forward-propagating cladding modes (transmission filters rather than reflectors).


  • Phase-shifted or complex structures: Used for ultra-narrow filters or distributed-feedback (DFB) lasers.


FBGs are typically inscribed by exposing photosensitive fiber (often germanium-doped silica) to a UV interference pattern or by point-by-point writing with a femtosecond laser. They are all-fiber, compact, low-loss outside the reflection band, and can be written in standard single-mode, polarization-maintaining, or specialty fibers.


Applications:



Fiber lasers:


  • High-reflector (HR) and output-coupler (OC) mirrors in distributed Bragg reflector (DBR) fiber lasers, providing narrowband feedback and defining the lasing wavelength.


  • Distributed-feedback (DFB) fiber lasers, where a phase-shifted FBG is written directly into rare-earth-doped fiber, enabling single-frequency operation.


  • Wavelength stabilization of pump laser diodes (e.g., 980 nm or 1480 nm for EDFAs).⁠


Telecommunications and optical filtering:


  • Wavelength-selective filters and optical add-drop multiplexers (OADMs) in WDM systems.


  • Gain-flattening filters for EDFAs.


  • Chromatic dispersion compensation using chirped FBGs.


  • Narrowband wavelength references and channel monitors.


Fiber-optic sensing:


  • Strain, temperature, pressure, and vibration sensors. Mechanical strain or temperature changes the grating period and effective index, shifting λB (typical sensitivities ~1 pm/με for strain and ~10 pm/°C for temperature in silica). Multiple FBGs at different wavelengths can be multiplexed on one fiber for quasi-distributed sensing.


  • Widely used in structural health monitoring (bridges, pipelines, aircraft), oil and gas, aerospace, and biomedical applications.


Other photonics uses:


  • Pulse stretching/compression in chirped-pulse amplification.


  • Mode converters (especially tilted or long-period gratings).


  • Ultrafast pulse shaping and microwave photonics filters.


FBGs combine the advantages of being fully integrated into fiber, passive, wavelength-encoded (immune to intensity fluctuations), and capable of high multiplexing density, making them foundational components in both fiber lasers and sensing systems.


bottom of page