
Diffraction Grating
Diffraction grating (also called an optical grating) is a periodic optical structure—typically a surface with regularly spaced grooves or a volume with periodic refractive-index modulation—that diffracts incident light into multiple discrete beams (diffraction orders) whose directions depend on wavelength.
In lasers and photonics it is a fundamental dispersive and wavelength-selective element. Unlike a prism (which separates colors by refraction), a grating separates wavelengths by diffraction and interference. The angular positions of the diffracted orders obey the grating equation:
mλ=d(sinα+sinβ)
where:
m is the integer diffraction order (m=0 is the specular/undiffracted beam),
λ is the wavelength,
d is the groove spacing (or 1/d is the groove density in lines/mm),
α is the angle of incidence and β the angle of diffraction (both measured from the surface normal).
A special case is the Littrow configuration, in which the diffracted beam returns along the incident path (α=β):
mλ=2dsinα.
This is widely used for laser wavelength tuning.
Technical Information:
Types: Reflection gratings (most common; metallic or dielectric coatings) and transmission gratings. Surface-relief (ruled or holographic) versus volume Bragg gratings (periodic index modulation inside a transparent medium). Blazed (echelette) gratings have a sawtooth profile optimized for high efficiency into a preferred order at a design (blaze) wavelength. Echelle gratings use low groove density and high orders/angles for high dispersion.
Key parameters: Groove density (commonly 300–3600 lines/mm), diffraction efficiency (often >90 % into the desired order for laser-grade gratings; multilayer dielectric gratings can reach 95–98 %), angular dispersion dβdλ=mdcosβ\frac{d\beta}{d\lambda} = \frac{m}{d\cos\beta}dλdβ=dcosβm, resolving power R=mNR = mNR=mN (where NNN is the number of illuminated grooves), polarization dependence, and laser-induced damage threshold.
Fabrication: Mechanically ruled (diamond tip), holographic/photolithographic, electron-beam, or laser-written; replicas are often mass-produced from masters. Holographic gratings typically show lower stray light.
Volume Bragg gratings (VBGs) are thicker and highly wavelength- and angle-selective (Bragg condition), offering narrowband reflection or transmission with efficiencies often >99 % and high power handling.
Applications:
Wavelength tuning and linewidth control: Littrow or Littman–Metcalf external-cavity diode lasers, dye lasers, and molecular lasers use rotatable gratings as end mirrors to select a narrow wavelength within the gain bandwidth.
Spectroscopy and spectral analysis: Core element in monochromators, spectrometers, optical spectrum analyzers, and spectrographs. High-resolution instruments (including astronomical echelle systems) exploit the angular dispersion.
Ultrafast lasers and chirped-pulse amplification (CPA): Pairs of gratings introduce large chromatic dispersion to stretch femtosecond pulses (reducing peak power for amplification) and then recompress them, enabling terawatt-class systems. Multilayer dielectric and gold gratings are common for high damage thresholds.
Spectral beam combining: Combines outputs of multiple lasers at slightly different wavelengths into a single high-power, high-brightness beam while preserving beam quality.
Other uses: Wavelength stabilization of laser diodes (especially with VBGs), dispersion compensation, polarization control, quantum-optics photon routing/spectral filtering, and high-power laser beam management.
Diffraction gratings are indispensable dispersive tools that convert wavelength differences into angular separation or provide precise wavelength-selective feedback, enabling tunable lasers, high-resolution spectroscopy, and extreme-power ultrafast systems.