
Chip-on-Submount (CoS)
Chip-on-Submount (CoS or COS) is a packaging architecture used for semiconductor laser diodes (and related optoelectronic devices such as photodetectors or LEDs) in photonics. In a CoS, the bare laser diode chip (die) is bonded directly onto a thermally conductive submount substrate, forming a compact intermediate assembly that is later integrated into a larger module, heatsink, or system.
Technical Information:
Structure: The laser chip is typically eutectically bonded (commonly with AuSn solder) to the submount in a “P-down” or similar orientation for efficient heat extraction. The submount provides both mechanical support and a short, low-thermal-resistance path for heat dissipation. Common submount materials include aluminum nitride (AlN), silicon carbide (SiC), or direct-bonded copper (DBC) substrates, chosen for high thermal conductivity and coefficient of thermal expansion (CTE) matching to the semiconductor chip. Bond pads or wire-bond sites provide electrical connections; the laser facet is usually left accessible.
Thermal and electrical advantages: Heat flows through a short path (chip → solder → submount → next-level heatsink), yielding lower thermal resistance than many enclosed packages. This supports higher optical power and better wavelength stability. Electrical connection is usually made by wire bonding (preferred over soldering in some guidelines to reduce contamination risk).
Comparison to other packages: CoS is more open and compact than a traditional TO-can (transistor-outline can). It allows micro-optics to be placed very close to the laser facet for precise beam shaping and fiber coupling, and multiple CoS units can be combined in one module. Unlike a fully hermetic TO-can, a bare CoS is not inherently sealed—the chip and bond wires are exposed—so careful handling, ESD protection, and subsequent module-level sealing (e.g., seam sealing or glass soldering) are required. Some systems treat CoS as an intermediate step inside a higher-level package.
Handling notes: CoS modules are sensitive to mechanical damage during pick-and-place, electrostatic discharge, contamination of the facet, and improper attachment materials. Manufacturers provide specific guidelines (placement accuracy typically ±25 µm, limited collet size, etc.). The end system’s reliability depends on the final assembly, not just the CoS itself.
Typical optical powers range from milliwatts (telecom/datacom) to tens of watts (high-power single emitters or arrays) depending on the wavelength and design; examples include 5 W blue (445 nm) devices and multi-watt near-IR (915–976 nm) pump lasers.
Applications:
CoS is widely used where compact size, high power density, close optical access, and good thermal management are needed:
Industrial lasers and materials processing — multi-emitter modules for welding, cutting, engraving, and illumination (including blue and near-IR sources). Multiple CoS units can be fiber-coupled into compact high-power modules.
Medical and surgical systems — compact multi-wavelength or high-power sources for advanced surgical instruments and aesthetic devices.
Telecommunications and datacom — laser and photodetector CoS building blocks inside optical transceivers and modules (including high-speed and coherent systems).
Pumping — solid-state or fiber lasers (e.g., 9xx nm CoS as pump sources).
Sensing, LiDAR, defense, and free-space optics — compact high-reliability sources for ranging, targeting, and communications.
Other — laser engraving systems, heat-assisted magnetic recording (HAMR) light sources, and various OEM photonic modules.
CoS is a versatile, thermally efficient intermediate packaging format that bridges a bare laser chip and a finished photonic module, enabling denser, higher-performance laser systems compared with traditional can-style packages while requiring careful assembly practices.