top of page
ABCD Matrix

Beam Delivery Fiber

Beam Delivery Fiber (also called a delivery fiber, process fiber, or fiber optic beam delivery cable) is a specialized optical fiber used to transport laser light from a source to an application point in lasers and photonics systems.


It provides flexible routing of the beam, in contrast to free-space delivery (mirrors, lenses, and articulated arms). The laser light propagates inside the fiber primarily by total internal reflection (TIR).


Technical Information:


  • Structure: A higher-index core (typically pure fused silica for high-power use) is surrounded by a lower-index cladding (often doped silica). Outer buffer and jacket layers provide mechanical protection and flexibility. For high powers, pure-silica cores are preferred for damage resistance.


  • Core diameters: Typically range from ~50 μm to several hundred μm (or up to ~1 mm). Common industrial sizes are 50, 100, and 200 μm. Smaller cores support better beam quality (lower beam parameter product) but handle less power density.⁠


  • Beam Parameter Product (BPP): Quantifies focusability. For the output of a fiber, BPP is approximately the product of the core radius and the output divergence half-angle. Smaller core radius and/or lower divergence give lower (better) BPP. Multimode delivery often yields BPP values of a few mm·mrad (e.g., ~2–8 mm·mrad for common 50–200 μm cores). Single-mode or large-mode-area (LMA) fibers can preserve near-diffraction-limited quality (low M2).


  • Fiber types:

    • Multimode step-index fibers (most common for multi-kW CW average power).

    • Single-mode or LMA fibers for higher brightness.

    • Specialty fibers (e.g., mode-scrambling designs for flat-top profiles).

    • Hollow-core photonic crystal / anti-resonant fibers for high peak-power or ultrafast pulses. These guide light mostly in an air/vacuum core, greatly reducing nonlinear effects (SRS, SBS, self-phase modulation) and enabling higher damage thresholds.


  • Power handling and limitations: Multimode solid-core fibers routinely deliver multi-kilowatt continuous-wave powers (with proper connectors, mode strippers, quartz end blocks, and cooling). Peak-power limits arise from end-face damage and nonlinear effects. Hollow-core fibers support high-energy ns/ps/fs pulses (hundreds of μJ to multi-mJ in some cases) and can transmit kilowatts over long distances (hundreds of meters to kilometers in advanced designs) with low nonlinearity.


  • Practical features: High-power systems often use standardized connectors (QBH, QD, etc.), mode strippers to remove cladding light, water-cooled ends, and pre-aligned output optics. Minimum bend radius and connectorization are important mechanical constraints. Coupling optics must match the laser’s BPP and the fiber’s NA/core size to minimize losses and preserve beam quality.⁠


Applications:


  • Industrial laser material processing: Cutting, welding, drilling, cladding, hardening, and marking of metals and other materials. The fiber allows a fixed laser source to feed a moving robot- or gantry-mounted processing head. Fiber lasers commonly integrate delivery fibers; the approach is also widely used with solid-state and diode lasers.⁠


  • Medical and surgical lasers: Flexible delivery for endoscopic procedures, dermatology, ophthalmology, and other therapies, often with biocompatible coatings or specialized connectors.


  • Ultrafast / high-peak-power micromachining: Hollow-core fiber delivery enables robotic or multi-station use of picosecond and femtosecond lasers while preserving pulse duration and beam quality.


  • Scientific, sensing, and specialty uses: LIDAR, spectroscopy, long-distance power delivery (e.g., remote processing or research), laser ignition, and distributed systems.


Beam delivery fibers combine the flexibility of optical fibers with the high-power and beam-quality requirements of modern lasers. Solid-core multimode designs dominate high-average-power industrial use, while hollow-core fibers expand capability into high-peak-power and ultrafast regimes.

bottom of page